Easycap usb12/31/2022 ![]() Don't worry, the application does not contain any function/code to visit built-in camera because it is unnecessary. IMPORTANT! On Android 9 and above, Camera permission is required to get fully USB Video device access. The recording will not interrupted during switching! It support auto video recording which based on Motion Detection and the video record can be uploaded to FTP server automatically and notify you via Email! Bi-directional audio requires IP Camera App, you can get it from IP Camera Bridge - A MJPEG video streaming and virtual microphone driver for Windows which can make your Windows applications using USB Camera as WebCam with audio input. "USB Camera" can be used as "Dash Cam" USB Camera can seamless switching between foreground and background. Can set auto-segment when recording and auto-delete old video archives when no enough storage. ![]() It also supports WebCam's snapshot button. ![]() FPV goggle) "USB Camera" can add timestamp, GPS, speed and other info on the video frames while recording and can use your headset or Bluetooth headset to capture snapshot and record video. "USB Camera" supports Side by Side(SBS) view and it can work with Cardboard. You can turn it on from IP Camera Server. It also supports the rtmps security protocol. Push to YouTube, Facebook), and use for network broadcast. "USB Camera" can push the video and audio to RTMP live media server (e.g. "USB Camera" can mix USB Audio with a built-in microphone and output. You can record video or capture snapshot, OR turn your phone into a wireless IP Camera via build-in RTSP and HTTP Server for security monitoring WITH Bi-directional audio support, you can use your browser to view, of course, include "IP Camera" App. "USB Camera" can let your android device connect to USB WebCam or video capture card via USB-OTG. Using HEVC for video recording requires Android 7.0 or above, and the device must supports HEVC codec. Some devices may need to bridge HUB to enhanced USB signals to work properly, e.g. Please use a good quality OTG cable and ensure power supply. Please switch the video Standard(PAL/NTSC/SECAM) if video freeze when using Eas圜ap. 'Picture In Picture', 'Display Video On Lock Screen', 'Auto-record after connected' and so on) from General Settings and without ads *** Using USB 3.0 HDMI capture card and Android 9.0 test : Using UVC H.264 device : Connect multiple devices : RTSP real time stream : RTMP live streaming : Picture In Picture : VR/Cardboard View : Display Video On Lock Screen : Tip: Supports following devices: 1) UVC WebCam with microphone (Supports H.264, MJPG, YUY2 and so on) 2) UVC video grabber with audio input (Up to 1080p via HDMI, Supports H.264, MJPG, YUY2 and so on) 3) Eas圜ap including audio with UTV007 / HTV600 / HTV800 chipsets (VID_1B71&PID_3002) 4) Eas圜ap including audio with STK1160 + SAA7113/GM7113 + AC97 chipsets (Audio 48kHz stereo version VID_05E1&PID_0408) 5) Eas圜ap including audio with STK1160 + SAA7113/GM7113 (Audio 8kHz mono version VID_05E1&PID_0408) 6) Eas圜ap including audio with EM2860 + SAA7113/GM7113 + AC97 chipsets (VID_EB1A&PID_2861) 7) Eas圜ap including audio with SMI2021 + SAA7113/GM7113 + ES7240/CS5340 chipsets (VID_1C88&PID_0007, PID_003C, PID_003D, PID_003E, PID_003F, PID_1001) Please click USB icon from toolbar to open Device dialog to open device if the system unable to detect your device. *** The Pro version provides some extra features (e.g.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |